Overview

The GE 323A3347P5 is a 37‑conductor interconnection cable within GE industrial product lineup, part of the complete 323A3347 cable family. It has a nominal length of 5 feet. Designed for internal signal interconnection between circuit boards and racks of legacy GE industrial and turbine control systems, it transmits multiple discrete and analog control signals. As a factory‑assembled industrial‑grade cable, it comes with pre‑crimped mating connectors at both ends, requiring no field termination. It is primarily used as a spare part for equipment replacement and maintenance.

Basic Information

Product Construction & Physical Characteristics

• Conductor Count: 37 stranded signal conductors, engineered for multi‑channel parallel industrial control signals. This is not a power‑supply cable; it is intended exclusively for low‑level signal transmission and cannot carry high‑power current.
• Factory‑finished Cable: Both ends are pre‑fitted with dedicated industrial rectangular connectors for direct mating with matching GE board / rack interfaces. Manual crimping and wiring are eliminated to guarantee one‑to‑one channel correspondence.
• Jacket: Flexible industrial‑grade outer jacket, suitable for internal cabinet routing. For cabinet‑internal wiring only; not designed for outdoor exposed installation or direct burial.

• Length: 5 feet (≈1.524 meters). The suffix P5 indicates 5FT length, which is the key identification feature for this part number.

• 

Compatible Application Scenarios

• Transmits discrete input/output signals and low‑speed analog control signals.
• Positioning: Pre‑assembled connection spare for board‑to‑rack interconnections inside control cabinets, widely used for maintenance and replacement on aging units.

• Only compatible with corresponding GE hardware interfaces. Connectors are custom‑built GE components and cannot be directly interchanged with generic off‑the‑shelf 37‑conductor cables.

• 

Cross‑Reference Table for Peer‑Series Part Numbers

Key Notes for Procurement & Replacement

• This is a complete pre‑terminated cable assembly with connectors. It cannot be simply replaced by ordinary bare 37‑conductor wire. Pin assignments, housing latches and keying features of both‑end connectors are GE‑customized.
• Always verify the full part number 323A3347P5 for replacement. The digit following suffix P represents length; P3 / P5 / P6 cannot be directly substituted for one another.
• This item is a spare for legacy equipment and is not part of GE’s current new‑product portfolio; it circulates mainly as stock spare inventory.